El skyport flash virtual studio

Author: e | 2025-04-23

Download the Elinchrom EL-Skyport 3.1 User Manual to learn how to create a virtual flash studio, remotely control EL-Skyport units, and save your studio setups.

EL-Skyport Flash Virtual Studio 3.

Units work into the system.The Standby and friendly name function cannot work; however, power and triggering should be possible.Please note we cannot guarantee this setup will work smoothly without issues. Misfires when using the Studio Software / App If you experience misfires, we advise setting the Auto-refresh to OFF.You’ll have better performances, but the Software/App will not scan for new units anymore.When the Auto-refresh button is ON, it will periodically read the settings on the units and scan for new units. Connect the Elinchrom Bridge to a device with Bluetooth Download the latest Elinchrom Studio App for iOS or Android and Software for macOS or Windows.Update the Elinchrom Bridge or the Elinchrom ONE/FIVE to the latest Firmware (with the Elinchrom Updater).Activate Bluetooth on your device.Switch ON the Bridge or the Elinchrom ONE.Launch the App/Software and find the connected Bridge / Elinchrom ONE/FIVE displayed in the window.The LED of the Bridge flashes in Blue.Chose the frequency channel 1 to 20, depending on which channel your flash units are set, normally to channel 1.Scan for enabled Elinchrom flash units.Start to control the units.Battery run time is about 6 to 8 hours, but the Bridge can also be used with the USB micro cable connected to your computer for charging. You can chose if you use the USB cable or the Bluetooth connection. What is Auto Off mode on the Elinchrom Bridge? The Elinchrom Bridge will automatically turn off after 120 min if no activity is detected. How to recognise units in the Studio Software / App? It is possible to click on the picture of the flash unit to send a test trigger.Once you know what unit it is, you can rename the unit with a user-friendly name. Install error on the Elinchrom Studio for macOS If you’re having an error message while installing the Elinchrom Studio on a Mac, go to:System Preferences > Security & Privacy > click, “Open Anyway” The Elinchrom Studio software on mobile devices The Elinchrom Studio App is available and compatible with iOS and Android. What is the Elinchrom Bridge module? The Elinchrom Bridge is the required link between Elinchrom units and the Elinchrom Studio Software / App to be able to control your setup. What happened with the older EL-Skyport Software? The EL-Skyport Software is not supported anymore and has been discontinued.Please refer to the Elinchrom Studio Software and the Elinchrom Bridge for the latest version. Elinchrom Studio for macOS and Windows The Elinchrom Studio software is compatible with the latest macOS and Windows operating systems. Elinchrom Studio compatibility with the Skyport USB RX The Elinchrom Studio is not compatible with the Skyport USB RX.You need the Elinchrom Bridge module to use the Elinchrom Studio Software or App. What is Auto-refresh in the Studio Software / App? When the Auto-refresh button is ON, it will periodically read the settings on the units and scan for new units.If you experience misfires, we advise setting the Auto-refresh to OFF. You’ll have better performances, but the Software/App will not Not available with the ONE/THREE.HSS will be enabled automatically with the Transmitter Pro and compatible cameras.Note: Elinchrom units integrated into an existing Elinchrom setup with Hi-Sync and HSS units altogether work seamlessly. Can I control the ONE/THREE via smartphone or computer? Yes. You can control the ONE/THREE with the Elinchrom Studio Software and/or the iOS App. Can the ONE/THREE achieve HSS (High Speed Sync)? Yes, the ONE/THREE can enable HSS and TTL with the Transmitter Pro. Transmitter not working Check the following points:Both devices must have the same frequency channel.The transmitter and the unit must be set in the same Sync mode (Normal or Speed Mode).Change the frequency channel on the flash unit and the transmitter and test again. Is the battery of the Transmitter discharged?Are the sync cables working properly?Are the camera settings correct?Is the unit used in bright ambient light, sun, or halogen lamp directed on the photocell (the photocell may block the synchro circuit on these classical units)?Re-check the triggering in a darker room with a minimum of ambient light.Check the Transmitter with another flash unit.Avoid metal objects or walls between the flash units and the transmitter.In case a flash tube is faulty, you can hear the click sound of the flash unit but no flash; this would indicate replacing the flash tube. Dark slide on the picture If a dark slide appears on your picture, this could be a sync issue when you use too short sync speeds with DSLR cameras.You need to set the camera shutter speed at least at one value slower to maybe 1/200s or 1/160s.Read more about flash sync. EL-Skyport Receiver Universal, dead or alive? Please try the following to recover your module:Connect to the charger and wait a few minutes.An irregular flashing green light (it can be a very weak light) should appear.If you see the green light, please find the small hole above the on/off switch and press for about 10 seconds until the green light gets stronger. This will reset the module and the deeply discharged battery. Note: the charger must be connected during this process.The Universal Module’s battery should recover. If not, please contact your Elinchrom service center. EL-Skyport Speed and modeling lamp settings The EL-Skyport Speed offers the following lamp mode options:Press the + button for 3 seconds: modeling lamp is in proportional mode.Press the + button for 5 seconds: one time short the modeling lamp will switch from “Prop” to “Free” Mode and the modeling lamp will set automatically to the last “Free” value.If you wait 5 seconds after switching on the modeling lamp, the modeling lamp and the flash power can be controlled with the +/- buttons.To switch the modeling lamp off press the + button again for 3 seconds. Skyport system compatibility with cameras All cameras respecting the standard sync triggering system will work.The Hi-Sync/HSS/TTL features on the Transmitter Pro are only available for Nikon, Canon, Sony, and Fujifilm cameras (learn more). The D-Lite it and Skyport compatibility You can trigger the flash with

EL-Skyport Virtual Flash Studio 3 - Elinchrom

You Are Now Free!The Skyport Plus HS is more than just a trigger for flash units.Control & visualise power settings of your Elinchrom unitsVisual feedbackControl of all your lighting setup through a visual feedback interface with the display of power levels and modelling lamp settings.Hi-Sync technologyOnce Hi-Sync is activated, anyone can go beyond the normal X-sync of your DSLR camera. An 1/8000s shutter speed is now accessible to all, depending on the digital camera and type of flash unit.Extra distance rangeThe distance range, 200 m (656 feet) outdoors and 60 m (196 feet) indoors, will enable to work under challenging circumstances without missing an important moment. No extra receiverAny flash unit with EL-Skyport capability, either built-in or external (like Transceiver RX for Style RX, Digital RX and Ranger RX series) is compatible.What is Hi-Sync ? Hi-Sync is the open door to a complete new world of flash photography.It's time to go past the barrier of flash photography!Hi-Sync is the exclusive Elinchrom technology to go beyond the X-Sync of your DSLR camera.For Nikon, Canon, Sony, Olympus and Panasonic.It's easier than ever to setup and trigger your DSLR camera up to 1/8000s shutter speed.This allows you to do the following: Freeze motionOverpower the SunDarken backgroundUse wider aperture FeaturesEasy access to in-depth features.Take full control and expand your vision!Visual interfaceThe large LCD display features two-way control that lets you see the exact power of every light in your setup right on the transmitter. Users can control each light's power level and modelling lamp setting directly from the transmitter, which instantly shows the updated power settings.ODS (Over Drive Sync)ODS enables users to fine tune the Skyport Plus HS transmitter's trigger signal to optimize exposure at high shutter speeds while gain more light.Remote controlNot only a trigger device; it is also a remote control for up-to 10 Elinchrom flash units with built-in receivers. Control and set the flash power and the modelling lamp in 4 Groups or individually. Improved reliabilityThe EL-Skyport HS has a total of 20 frequency channels that can be used for either Normal or Speed mode. Users can instantly distinguish which sync mode they are in as the backlit display glows green for normal mode, and red for speed mode. They can also enjoy a range up to 200 m (656’) outdoors and up to 60 m (196’) indoors.CompatibilityThe EL-Skyport HS represents a seamless extension of the EL-Skyport family since it is also compatible with the three previous generations of flash units (including the EL-Skyport Transceiver RX module for Style RX, Digitial RX, and Ranger RX systems, the integrated EL-Skyport modules for D-Lite RX, BRX, ELC Pro HD and ELB series.). Future-proofThe transmitter attaches easily and securely to the hotshoe with its bayonet locking system and is powered by 2x AA batteries. It also features an integrated AF illuminator for fast focusing and a mini-USB socket for firmware updates.. Download the Elinchrom EL-Skyport 3.1 User Manual to learn how to create a virtual flash studio, remotely control EL-Skyport units, and save your studio setups.

EL-Skyport Flash Virtual Studio 3. - Download

Mise­au­rebut­et­recyclage­... Page 14: Caractéristiques Émetteur EL-Skyport Eco 19349 Instructions de fonctionnement: Émetteur 2.4 GHz sans fil de déclenchement des flashes Caractéristiques: L’émetteur­de­déclenchement­de­flash­EL-Skyport­Eco­est­conçu­avec­la­dernière­technologie­numérique­sans­fil­2.4­GHz. •­ Vitesses­de­synchronisation­des­appareils­de­ •­ Sabot­de­fixation­avec­contact­central­intégré photo­réflex­mono-objectif­:­jusqu’à­1/250­s­ •­ 2­modes­de­déclenchement,­standard­et­rapide­ en­mode­SPEED,­1/160­à­1/200­s­en­mode­ (SPEED) STANDARD •­ Mode­standard­compatible­avec­les­versions­ •­ 4­canaux­de­fréquence­à­choix précédentes­des­modules­EL-Skyport •­ Encryptage­de­sécurité­de­40­bits •­ LED­de­visualisation­du­mode­et­de­l’état­de­la­batterie •­ Portée­à­l’intérieur­jusqu’à­50­m­en­mode­ •­ Nouvelles­possibilités­étendues­:­le­module­peut­être­... Page 15: Fréquence Du Canal Radio Fig. 2 LED­d’état Sélecteur­d’une­des­ 4­fréquences­radio­ (choix­d’un­canal)­ Test­de­déclenchement­ /­Modes­du­flash­ /­Bouton­de­ configuration Fréquence du canal radio Remarque: Pour­communiquer­entre­eux,­l’émetteur­et­l’émetteur/récepteur­(transceiver)­RX­ou­le­récepteur­ universel­RX,­doivent­avoir­la­même­fréquence­de­communication. Fréquence du Configuration des intérrupteurs Fréquence canal en Mhz 1 (par défaut) 2456 2458 2460 On­ 2462 Modes de synchronisation standard et « Speed » La­fonction­SPEED­est­disponible­pour­les­produits­suivants­:­«­Ranger­Quadra­AS­»,­«­BXRi­250/500­»,­«­... Page 16: Caractéristiques De L'émetteur El-Skyport Eco Configuration du module EL-Skyport Possible­seulement­avec­le­logiciel­PC­/­MAC­EL-Skyport­version­3.0­et­supérieure. •­ Temporisateur­d’économie­d’énergie,­programmable­séparément­ou­désactivé •­ Le­délai­peut­être­programmé­de­250­microsecondes­(1/4000s)­à­15­s. •­ Télécharger­gratuitement­le­logiciel­PC­/­MAC­EL-Skyport­3.0­sur­www.elinchrom.com Mode de configuration SET pour définir les fonctions disponibles (possible­seulement­avec­le­logiciel­PC­/­MAC­EL-Skyport) •­ Eteindre­le­module­et­enlever­la­batterie­en­sortant­le­tiroir •­ Maintenez­pressé­le­bouton­«­Test­»­alors­que­vous­insérez­le­tiroir­avec­la­batterie •­ gardez­le­bouton­«­Test­»­pressé­jusqu’à­ce­que­la­LED­d’état­s’allume •­ ­voir­aussi­comment­changer­la­configuration­de­l’émetteur­avec­le­logiciel­ è PC­/­MAC­EL-Skyport­3.0 Caractéristiques de l’émetteur EL-Skyport Eco Mode d’économie de la batterie •­... Page 17: Autres Modules "El-Skyport Autres modules “EL-Skyport” Récepteur EL-Skyport Universel Speed (NOUVEAU) / Universel (version précédente) ­•­ Permet­de­déclencher­les­flashes­de­tous­les­fabricants­munis­d’une­prise­synchro­conforme­aux­normes. Émetteur / récepteur EL-Skyport pour gamme RX ­•­ Module­de­déclenchement­et­de­communication,­il­est­destiné­uniquement­aux­flashes­­ ­ ­ ­­­­­­RX.­Ce­module,­supporte­toutes­les­fonctionnalités­avancées­du­système­de­ ­ communication­“EL-Skyport”­avec­un­ordinateur­PC­ou­Mac. Module EL-Skyport USB RX Speed (NOUVEAU) / USB RX (version précédente) ­ •­... Page 18: Mise Au Rebut Et Recyclage Déclaration de conformité CE Cet­équipement­a­été­testé­et­déclaré­conforme­aux­directives­européennes­ci-après­:­EMC­ Directive­89/336/EEC,­basse­tension­Directive­73/23/EEC­et­­R&TTE­Directive­99/5/EC. Mise au rebut et recyclage ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ Ce­symbole,­apposé­sur­ce­produit­ou­sur­son­emballage,­indique­que­si­un­jour­ce­produit­ devait­être­éliminé,­il­ne­devrait­pas­être­traité­avec­les­déchets­ménagers.­Il­devrait­être­ remis­à­un­point­de­collecte­approprié­pour­le­recyclage­des­équipements­électroniques.­En­ respectant­­ces­conseils­vous­aiderez­à­prévenir­les­conséquences­potentiellement­négatives­ pour­l’environnement­et­la­santé­humaine.­Le­recyclage­des­matériaux­aidera­à­préserver­les­ressources­ naturelles.­Pour­toute­information­supplémentaire­vous­pouvez­contacter­la­déchetterie­ou­l’agent­Elinchrom­ du­pays.­La­liste­des­agents,­est­disponible­sur­notre­site:­www.elinchrom.com... Page 19 Tr a n s m i t t e r E c o 19349 Instrucciones para el uso Características­ Instalación­de­la­batería­ Conector­de­la­zapata­del­flash­ Instrucciones­de­funcionamiento­ Canal­de­frecuencia­ Modos­de­disparo­ Enchufe­SYNC­integrado­ Características­del­EL-Skyport­ECO­ Solución­de­problemas­ Declaración­de­la­CE­ Eliminación­y­reciclado­... Page 20: Características EL-Skyport Transmitter Eco 19349 Instrucciones de funcionamiento : Sistema inalámbrico digital a 2,4GHz Transmisor de disparador de flash Características El­disparador­de­flash­EL-Skyport­Transmitter­Eco­ha­sido­diseñado­con­la­última­tecnología wireless digital­a­2,4GHz. • •­­Nuevas­características­adicionales;­configure­EL-Skyport­ ­­Velocidades­de­sincronización­de­la­Cámara­SLR:­modo­ ­­­­con­el­nuevo­software­EL-Skyport­para­PC/MAC.­3.0. ­­­de­VELOCIDAD­hasta­1/250,­modo­ESTANDAR­ •­­La­función­VELOCIDAD­está­disponible­para­Ranger­ ­­­1/160­-­1/200. Quadra­AS,­BXRi­250­/­500­und­D-lite­y­todas­las­otras­ •­­5­modos­de­disparo­seleccionables unidades,­candor­utilize­el­EL-Skyport­velocidad­universal. •­­5­canales­de­frecuencia. Contents Table of Contents Troubleshooting Bookmarks Need help? Do you have a question about the el-skyport eco 19349 and is the answer not in the manual? Questions and answers Related Manuals for Elinchrom el-skyport eco 19349 Summary of Contents for Elinchrom el-skyport eco 19349 Page 1: Table Of Contents Tr a n s m i t t e r E c o 19349 User­Manual C o n t e n t s : Features­ Battery­Installation­ Hot-shoe­connector­ Operating­Instructions­ Frequency­Channel­ EL-Skyport­ECO­Features­ EL-Skyport­Modules­ Troubleshooting­ CE­Statements­ FCC­Compliance­and­ ­ Advisory­Statement­ Disposal­and­recycling­... Page 2: Features EL-Skyport Transmitter Eco 19349 Operating instructions : 2.4 GHz digital wireless Flash Trigger Transmitter Features EL-Skyport­Transmitter­­Eco­is­designed­with­the­latest­2.4­GHz­Digital Wireless Technology. •­­SLR­Camera­Sync­speeds:­SPEED­mode­up­to •­­New­extra­features;­configure­EL-Skyport­with­the ­­­1/250­s,­STANDARD­mode­1/160­-­1/200­s. ­­­ new­EL-Skyport­PC/MAC­software­3.0. •­­4­frequency­channels. •­The­SPEED­function­is­available­for­Ranger­Quadra­AS,­­ •­­40­Bit­security­encryption. ­­­BXRi­250­/­500­and­D-Lite­it­and­all­other­units,­when­ •­­Up­to­50­m­range­indoors­for­standard­mode­and ­­­used­with­the­EL-Skyport­Universal­Speed.­ ­­­ up­to­30­m­in­speed­mode. You­will­appreciate­the­convenience­of­this­new­easy­to­ •­­Up­to­80­m­range­outdoors­for­standard­mode use­and­powerful­wireless­device. ­­­and­up­to­40­m­in­speed­mode. •­­Battery­life­up­to­6­Months­-­over­30’000­flashes. Note: Shutter­speed­and­distance­range­is­influenced­by­ •­­Test­trigger­button­and­feature­button. interference­from­other­2.4­GHz­electronic­equipment.­ •­­Integrated­Hot-shoe­(middle­contact). Page 3: Frequency Channel Synchronises SLR cameras up to 1/250 s, or compact digital cameras up to 1/2850 s -­Press­test­push­button­one­time­to­switch­module­on. -­Press­test­push­button­for­minimum­5­seconds­until­the­STATUS­LED­flashes­two­times. -­Release­test­push­button. -­Now­the­EL-Skyport­Transmitter­Eco­works­in­“SPEED”­mode­(r.2­mode). Select “Standard” triggering mode Synchronises SLR cameras up to 1/200 s, or compact digital cameras up to 1/1600 s -­Press­test­push­button­one­time­to­switch­module­on.. -­Press­test­push­button­for­minimum­5­seconds­until­the­STATUS­LED­flashes­one­time. -­Release­test­push­button. -­Now­the­EL-Skyport­Eco­works­in­“STANDARD”­mode. EL-Skyport Module Configuration: Only­possible­with­EL-Skyport­PC­/­MAC­software­v3.0­and­higher. -­Power-Save­Timer,­individual­programmable­or­disabled. -­Trigger­delay­is­programmable­from­250­microsecondes­(1/4000­s)­up­to­15­s. -­­Download­the­FREE­EL-Skyport­Software­3.0­from­www.elinchrom.com... Page 4: El-Skyport Eco Features SET Config Mode: (to configure included features only with MAC°/ PC° EL-Skyport Software V. 3.0) -­Switch­the­module­OFF­//­remove­battery.. -­Hold­the­Test­button­down­whilst­you­insert­the­battery.. -­Keep­test­push­button­pressed­until­STATUS­LED­is­ON. ­Please­check­also­EL-Skyport­PC/MAC­software­3.0­for­changing­Transmitter­setting. EL-Skyport Eco Features Power save mode timer: -­After­not­using­the­Transmitter­for­30­minutes­the­Power­Save­mode­is­active.­To­reactivate­the ­­Transmitter,­press­the­TEST­push­button. -­The­Power­Save­mode­timer­can­be­configured­with­the­EL-Skyport­PC/MAC­software­v3.0­and­higher. Status LED: -­LED­flashes­every­4­seconds­one­time­in­“Standard”­mode­and­two­times­in­“Speed”­mode. -­LED­intensity­correspond­to­the­battery­status­-­if­off­or­very­low­=>exchange­the­battery. -­LED­is­OFF­if­the­Transmitter­battery­is­discharged­or­in­“Power­Save”­mode. Reset to manufacturer default setting: -­Switch­the­module­ON­//­insert­battery. -­Press­test­button­for­min­10­seconds. Page 5: El-Skyport Modules EL-Skyport Modules EL-Skyport Universal SPEED (NEW) / Universal (previous version) ­­­­­•­Universal­Receiver­for­all­makes­of­Flash­having­a­SYNC­socket,­conforming­to­Sync­ norms! EL-Skyport Transceiver RX ­ •­ This­Transceiver­is­only­for­Elinchrom­RX­units.­The­module­operates­all­RX­ ­ ­ features­with­the­EL-Skyport­/­ERS-­software­3.0­and­triggers­the­flash EL-Skyport USB RX SPEED (NEW) / USB RX (previous version) ­ •­ To­operate­RX­flash­units­via­computer­the­USB­module­should­be­used­together­ ­ ­­ ­ ­­­­­with­the­EL-Skyport­Transceiver­RX­and­the­ERS-­software­3.0 Transceiver RX... Page 6: Fcc Compliance And Advisory Statement FCC Compliance and Advisory Statement This­device­complies­with­Part­15­of­the­FCC­rules.­Operation­is­subject­of­the­following­two­conditions:­ 1.­this­device­may­not­cause­harmful­interference,­and­2.­this­device­must­accept­any­interference­re- ceived,­including­interferences­that­may­cause­undesired­operation. The­equipment­has­been­certified­to­comply­with­the­limits­for­a­Class­B­computing­device­pursuant­to­ Part­15­of­the­FCC­Rules.­These­limits­are­designed­to­provide­reasonable­protection­against­harmful­ interference­in­a­residential­installation.­This­equipment­generates,­uses,­and­can­radiate­radio­frequency­ energy­and,­if­not­installed­or­used­in­accordance­with­the­instructions,­may­cause­harmful­interference­ to­radio­communications.­However,­there­is­no­guarantee­that­interference­will­not­occur­in­a­particular­ installation.­If­this­equipment­does­cause­harmful­interference­to­radio­or­television­reception,­which­can­ be­determined­by­switching­the­equipment­off­and­on.­The­user­can­try­to­correct­the­interference­by­the­ following­measures: 1.­ Reorient­or­relocate­the­receiving­antenna 2.­ Increase­the­separation­between­the­equipment­and­receiver

EL-Skyport Flash Virtual Studio 3. - Download, Review

Only trigger with the main flash. Transmitters and modelling lamp control Control of the modeling lamp is possible with the Transmitter Pro only and/or the Elinchrom App/Software.It is not possible to control the modeling lamp with the Transmitter Plus. Switch from TTL to manual TTL is only here to help you if needed.If you don’t want TTL, you can just as easily use it in Manual mode.You can start in TTL, lock exposure, and then switch to manual, we call this Manual Lock. ELB 500 TTL working with Speedlights Using Elinchrom: with the Elinchrom Receiver Plus, any Speedlight can be used in Manual to add to the existing setup.Using Phottix: with Phottix Odin II Receivers, corresponding compatible Speedlights can be used in either TTL or Manual. Only Canon and Nikon are supported. Elinchrom TTL units in a classic Elinchrom setup Yes, you can use Elinchrom TTL units together with older Elinchrom flash units, but only in Manual mode, of course. ELB 500 TTL remote options The ELB 500 TTL integrates 2 remote options:Elinchrom Skyport: Compatible with the Elinchrom Transmitter Plus and Transmitter Pro and all Elinchrom units with built-in Skyport or Elinchrom Receiver Plus attached can be triggered together.Phottix Odin II: Compatible with Phottix Odin II transmitters and Phottix products with built-in Odin II or Phottix Odin II receivers. EL-Skyport Speed EL-Skyport Speed and modeling lamp settings The EL-Skyport Speed offers the following lamp mode options:Press the + button for 3 seconds: modeling lamp is in proportional mode.Press the + button for 5 seconds: one time short the modeling lamp will switch from “Prop” to “Free” Mode and the modeling lamp will set automatically to the last “Free” value.If you wait 5 seconds after switching on the modeling lamp, the modeling lamp and the flash power can be controlled with the +/- buttons.To switch the modeling lamp off press the + button again for 3 seconds. Skyport system compatibility with cameras All cameras respecting the standard sync triggering system will work.The Hi-Sync/HSS/TTL features on the Transmitter Pro are only available for Nikon, Canon, Sony, and Fujifilm cameras (learn more). Transmitter triggering problems Please verify the following points:Transmitter and receiver must have the same frequency channel settings.Transmitter and receiver must have the same synchronization mode settings: Normal or Speed sync mode (ELSP MODE on the Transmitter Pro).Check that the EL-Skyport receiver in all EL units with built-in receivers is switched ON.Try another frequency channel for both transmitter and the receiver of the Elinchrom unit.Reduce the distance between the flash unit and transmitter.Check the hotshoe fitting.Check the camera settings (turn hotshoe communication on).Check that the Transmitter Pro version corresponds to your Canon, Nikon, Sony, or Fujifilm camera.Check the list of compatible cameras.Learn more about Speed and Normal sync mode. The Transmitter does not recognize the unit Activate the EL-Skyport receiver in your unit.Switch on the EL-Skyport receiver in the unit.Set Group and Frequency Channel to 1.Set the Sync Mode of the unit to Normal (on the Transmitter Pro, under the ELSP feature;

Elinchrom Remote Studio EL Skyport 3.0 Download - EL Skyport

The D-Lite it, but that’s it.Only the D-lite RX versions can be power controlled with Elinchrom Transmitters or from the Elinchrom App/Software. Skyport generations There are three different Elinchrom EL-Skyport flash unit generations in the market.Every new generation offers additional new features and improved performance.1st GenerationEL-Skyport Transceiver RX plug-in module for Style RX, Digital RX and Ranger RX.Units with the Transceiver RX can be detected but will not be displayed power levels. Their power levels can, however, be adjusted.2nd GenerationBuilt-in EL-Skyport module Mk1 for BRX, D-Lite RX, Quadra, Quadra Hybrid.These units can be detected with their power levels displayed and adjusted.3rd GenerationBuilt-in EL-Skyport module Mk2 for ELC Pro HD, ELC and ELB.These units can be detected with their power levels displayed and adjusted.This generation also offers an extended distance range. Transmitter triggering problems Please verify the following points:Transmitter and receiver must have the same frequency channel settings.Transmitter and receiver must have the same synchronization mode settings: Normal or Speed sync mode (ELSP MODE on the Transmitter Pro).Check that the EL-Skyport receiver in all EL units with built-in receivers is switched ON.Try another frequency channel for both transmitter and the receiver of the Elinchrom unit.Reduce the distance between the flash unit and transmitter.Check the hotshoe fitting.Check the camera settings (turn hotshoe communication on).Check that the Transmitter Pro version corresponds to your Canon, Nikon, Sony, or Fujifilm camera.Check the list of compatible cameras.Learn more about Speed and Normal sync mode. Change power from the Transmitter is not working Please make sure your Elinchrom unit and Transmitter are both updated with the latest firmware.www.elinchrom.com/support/firmware ELSP mode The Skyport Transmitter system has 2 operating modes that offer different shooting functionalities. NORMAL Sync ModeGreen LED – 200 m (656’) working range – Synchro is limited to X-Sync.SPEED Sync ModeRed LED – 100 m (328’) working range – Synchro is limited to X-Sync but enables faster shutter speeds only on digital medium format cameras.To use shutter speeds of up to 1/8000s, the HS / Hi-Sync mode must be activated on the Transmitter Pro when used in both Normal and Speed mode.Read more about the ELSP mode. Blue and green light The blue light in the back of the Transmitter Pro is the TTL communication with the camera.The green light in the front of the Transmitter Pro is the EL-Skyport communication between the transmitter and the Elinchrom flash unit. How to setup Hi-Sync/HSS ? Hi-Sync or HSS mode is detected automatically.Enabling the Hi-Sync/HSS feature is very simple but different for each camera.However, some cameras need a specific setup to be able to engage Hi-Sync or HSS.How to setup hi-sync / hss mode. How to control Elinchrom units with Speedlights You can trigger Elinchrom flashes with Speedlights.For a correct synchronization, you need to use the pre-flash feature of the photocell.Go to the menu PhotocellSelect preflash and confirmSelect Setup preflash Select Auto and confirmDisplay shows: waiting preflashesNow use your camera with the Speedlight mounted and trigger the camera directed to the photocell.Now the photocell is correctly adjusted and will. Download the Elinchrom EL-Skyport 3.1 User Manual to learn how to create a virtual flash studio, remotely control EL-Skyport units, and save your studio setups.

EL-Skyport V3 Software: Ugly? - Flash and Studio Lighting in

•­­Encriptación­de­seguridad­de­40­bits Apreciará­la­comodidad­de­este­dispositivo­inalámbrico­ •­­Con­un­rango­de­alcance­de­hasta­50­m­en­interiores­ potente,­fácil­de­utilizar­y­ ­­­para­el­modo­estándar­y­hasta­30­m­en­el­modo­velocidad. •­­Rango­de­alcance­de­hasta­80­m­en­exteriores­para­el­ Nota: ­­­­modo­estándar­y­de­hasta­40­m­en­el­modo­velocidad. Page 21: Canal De Frecuencia Fig. 2 Test­del­flash Selector­del­canal­ de­frecuencia Canal de frecuencia No ta : El­transmisor­y­los­Transceptores RX o Receptores universales­correspondientes­o­las­ unidades­EL­con­el­Receptor­EL-Skyport­integrado­deben­tener­la­misma­configuración­del­canal­ de­frecuencias! Canal de Configuración de los botones desli- Frecuencia del Frecuencia zantes disparador / MHz 1 (por defecto) Apagado Apagado 2456 Encendido Apagado 2458 Apagado Encendido... Page 22: Características Del El-Skyport Eco Configuración del módulo EL-Skyport: Sólo­es­posible­con­el­software­EL’Skyport­/­MAC­v­3.0­y­más­avanzada. - ­­­Retrasar­el­disparo­se­puede­programar­de­250­microsegundos­(1/4000s)­­hasta­15­s - ­­­Descargue­el­software­­EL-Skyport­3.0­GRATUITAMENTE­en­­www.elinchrom.com Modo de configuración SET (características incluidas para configurar sólo con el software EL’Skyport MACº / PCº) - ­­Apague­el­módulo­//­retire­la­batería. - ­­Mantenga­presionado­el­botón­de­prueba­mientras­inserta­la­batería. - ­­­Mantenga­el­botón­de­prueba­presionado­hasta­que­se­encienda­el­ESTADO­LED.  ­­Compruebe­el­software­EL-Skyport­­PC/MAC­para­cambiar­la­configuración­de­su­transmisor. Características del EL-Skyport ECO Temporizador del modo de ahorro de energía: - ­­­Si­no­utiliza­el­transmisor­por­30­minutos,­el­modo­de­ahorro­de­energía­se­activa.­Para­reactivar­el­trans... Page 23: Solución De Problemas Módulos del EL-Skyport EL-Skyport VELOCIDAD universal (NUEVO) / Universal (versión anterior) ­ •­ El­receptor­universal­para­todos­los­fabricantes­de­unidades­de­flash­que­tengan­un­­ ­ ­ ­ enchufe­tipo­SYNC­¡cumpliendo­las­normas­Sync! EL-Skyport Transceptor ­ •­ Este­transceptor­es­únicamente­adecuado­para­las­unidades­RX­de­Elinchrom.­El­­ ­ ­ ­ módulo­puede­manejar­todas­las­características­RX­con­el­software­EL-Skyport­/­ERS­y­­­ ­ además­dispara­el­flash EL-Skyport USB RX 19354 VELOCIDAD (NUEVO) / USB RX (VERSION ANTERIOR) ­... Page 24: Declaración De La Ce Declaración de la CE Este­dispositivo­ha­sido­testeado­y­se­ha­encontrado­que­cumple­con­los­ requisitos­establecidos­en­la­directiva­89/336/EEC­de­“compatibilidad­ electromagnética”,­la­73/23/EEC­­“directiva­para­bajo­voltaje”­y­la­directiva­99/5/ EC­de­la­R&TTE­según­establecen­las­directivas­del­consejo­en­aproximación­a­las­leyes­de­los­ estados­miembros­de­la­UE. Eliminación y reciclado Este­dispositivo­ha­sido­creado,­hasta­el­límite­de­lo­posible,­usando­materiales­que­ puedan­ser­reciclados­o­eliminados­de­modo­que­no­sean­dañinos­para­el­medio­ ambiente.­El­dispositivo­puede­ser­devuelto­después­de­su­uso­para­ser­reciclado,­ suponiendo­que­se­devuelva­en­una­condición­que­sea­resultado­de­un­uso­normal.­ Cualquier­componente­que­no­sea­reclamado­será­eliminado­de­un­modo­medio- ambientalmente­aceptable.­Si­tiene­cualquier­duda­sobre­la­eliminación­del­ dispositivo,­por­favor,­póngase­en­contacto­con­su­oficina­o­agente­locales­de­ELINCHROM­ (compruebe­en­nuestro­Sitio­Web­la­lista­de­todos­los­agentes­de­ELINCHROM­a­nivel­mundial). Page 25 Tr a n s m i t t e r E c o 19349 Istruzioni per l’uso I n d i c e : Caratteristiche­ Installazione­della­batteria­ Connettore­a­contatto­caldo­ Istruzioni­di­funzionamento­ Canale­diFrequenza­ Modalità­di­innesco­ Spina­sincro­integrata­ Caratteristiche­EL-Skyport­Eco­ Soluzione­guasti­ Dichiarazioni­CE­ Smaltimento­e­riciclo­... Page 26 EL-Skyport Transmitter Eco19349 Istruzioni di funzionamento : Trasmettitore innesco flash con tecnologia digitale senza fili a 2.4 GHz Caratteristiche L’innesco­flash­EL-Skyport­Transmitter­Eco­è­progettato­con­la­più­recente­tecnologia digitale senza fili­a­2.4­GHz­. •­Velocità­Sincronizzate­dell’Apparecchiatura­fotografica­ •­­Nuove­caratteristiche;­configura­EL-Skyport­con­il­ ­­SLR:­modalità­Veloce­fino­a­1/250­s,­modalità­ ­­­nuovo­software­EL-Skyport­per­PC/MAC­3.0. ­­Standard­1/160­–­1/200­s. •­­La­funzione­SPEED­è­disponibile­per­Ranger­Quadra­ •­4­canali­di­frequenza. ­­­­AS,­BXRi­250­–­500­und­D-Lite­it­e­tutte­le­altre­ •­Criptaggio­di­sicurezza­da­40­Bit. ­­­­unità,­quando­usata­con­il­EL-Skyport­Universal­ •­Campo­di­applicazione­fino­a­50­m­in­interno­con­ ­­­­Speed.­ ­­modalità­standard­e­fino­a­30­m­con­modalità­veloce. •­Campo­di­applicazione­fino­a­80­m­in­esterno­con­ Apprezzerete­la­praticità­di­questo­apparecchio­senza­ ­­modalità­standard­e­fino­a­40­m­in­modalità­veloce. fili­professionale­ed­efficace. •­Durata­della­batteria­fino­a­6­mesi­-­oltre­30’000­... Page 27 Fig. 2 Selettore­per­4 Flash­di­prova canale­di­frequenza Canale diFrequenza No ta : Il­trasmettitore­e­i­corrispondenti­Transceiver­RX­o­il­Ricevitore­Universale­o­le­unità­EL­con­il­ Ricevitore­EL-Skyport­integrato­devono­avere­le­stesse­impostazioni­per­il­canale­di­frequenza! Canale di Configurazione pulsante di scorri- Frequenza frequenza mento / Mhz 1 (predefinito) 2456 2458 2460 On­ 2462 Modalità Sincronizzata Veloce & Standard EL-Skyport La­funzione­SPEED­è­disponibile­per­Ranger­Quadra­AS,­BXRi­250­–­500­und­D-Lite­it­e­tutte­le­altre­ unità,­quando­usata­con­il­EL-Skyport­Universal­Speed­